Become a distributer Find a distributer
Financing Available Apply Here
TLS - 4 POST TLS415ALOXR1 / TLS415FDOXR1
Type of Product: Lift   |  

4 Post Open Front     BUY NOW

ALIGNMENT OR SERVICE 15,000 LB. / 6.8T CAPACITY

DOUBLE WALL RUNWAYS WITH “Z” RAILS, BUILT IN RADIUS PLATE POCKETS & REAR SLIP PLATE

Features:

  • Built to higher quality standard; 100% North American made - premium US Bucher 2HP / 1.5kw power unit.
  • Corrosion resistant protection - steel components are wheela-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
  • Superior structural strength provides longer life and more precise alignments - Non flex double wall 23” / 584mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.
  • Greater flexibility with more models to chose from - Available in two runway lengths with built in wheel alignment or service deck. Lift can be ordered in red or blue.
  • Premium options and accessories can expand the capabilities and service life - Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium long life 5 year warranty HD jacking beams
  • Lower maintenance costs - Zirk style grease fittings at all 1-1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting. Thirty 7/8” / 22mm enclosed plated steel slip plate balls provide better support with minimal maintenance.
  • Extended Life “Non Twist” Cable design - Machined steel nickel plated 9” / 229mm pulleys with bronze self lubricating bushings. Non spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.
  • Low pressure hydraulics provides longer life - 4”ID x 65” / 102mm ID x 1651mm cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.
  • Designed for optimum productivity - OPEN FRONT design provides clear access .Single point control with stainless steel cylinder air releases engage 12 locking positions. Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column.
Challenger Lift - 4015
Type of Product: Lifts   |  

4015    
$11,228.25   BUY NOW

Challenger’s 4015 4-post series lifts have 15,000 lb. capacity and are available in several configurations. We offer general service flat deck or dedicated alignment capabilities. Choose between open or closed front models to fit your service needs.

ALI/ETL certified.

Challenger Lift - CL10V3 Series
Type of Product: Lifts   |  

CL10V3 Series    
$6,011.75   BUY NOW

Challenger’s CL10V3 model features our exclusive Versymmetric® technology to allow you to service the widest range of vehicles and maximize your bottom line. 3-stage front and 3-stage rear arms with our industry-first directSPOT™ design eliminate the need to shuffle a vehicle back and forth to swing the front arm clear of the tire to reach recommended lift points. Accurate first-try spotting will boost your productivity as well as reduce frustration in your shop.

We also offer the CL10V3 in several configurations to meet your service application needs. A drive-on pad option provides the quickest vehicle spotting for express bays. Our added Quick Cycle™ models can rise in just 27 seconds and lower in only 17 seconds. Quick Cycle™ technology’s increased lift speed will drastically boost your service potential. Adjustable height and width options are also available. In addition, choose between a wide range of accessories to make the CL10V3 the perfect choice for your shop. Expand your service potential with our most versatile, easy-to-operate lift.

ALI/ETL certified.

Challenger Lift - CL12 Series
Type of Product: Lifts   |  

CL12 Series    
$9,423.85   BUY NOW

Challenger’s 12,000 lb. capacity CL12 2-post lift maximizes your profitability with true 3-stage front and 3-stage rear arms. The CL12 can accommodate a wide range of common cars, trucks, vans as well as SUVs within the same service bay. Geared arm restraints and steel pulleys increase durability. Other features include a single-point mechanical lock release system that allows technicians to disengage both column locks simultaneously and a padded overhead shut off system.

We know that no two shops are the same. Thatʼs why we now offer the CL12 with new productivity tools for personalized efficiency. Choose your size, controls and speed, and know that your investment is customized to lift your shop to new heights.
Stack adapters come standard for all models.

ALI/ETL certified.

Challenger Lift - E12
Type of Product: Lifts   |  

E12    
$6,852.35   BUY NOW

Challenger’s E12 is the perfect economic 2-post lift for servicing trucks and other vehicles up to 12,000 lbs. Heavy-duty 2-stage front and 2-stage rear arms offer symmetric lifting capability. Also, adjustable column height accommodates higher profile vehicles while providing ample servicing headroom. The E12 comes standards with stack adapters. Accommodate higher profile vehicles with optional 2 foot column extensions.

ALI/ETL certified.

Challenger Lift - LE10
Type of Product: Lifts   |  

LE10    
$2,893.00   BUY NOW

Our 10,000 lb. capacity LE10 economic 2-post lift features our innovative 3-stage front and 2-stage rear arms. Increase revenue potential and efficiency by lifting vehicles both symmetrically and asymmetrically in the same service bay. The LE10 allows you to lift a wide range of cars and trucks for a great value. Accommodate higher profile vehicles with optional 2 foot column extensions.
Stack adapters come standard for all models.

ALI/ETL certified.

Pinnacle - JUMBO 3D Super | Imaging Wheel Aligner
Type of Product: Alignment   |  

JUMBO 3D Super Imaging Wheel Aligner
$34,995.00     BUY NOW

FREE SHIPPING

Jumbo 3D Super supplied with 10 targets and integrated wheel brackets enables the user to measure results of all 5 axles simultaneously.

Features

  • One shot Runout compensation of all 5 axles
  • One shot caster swing for twin steer axles
  • Quick results, high productivity
  • Less labour cost

Jumbo 3D uses latest, innovative, digital-imaging technology by deploying quad camera system for data- acquisition. High resolution digital cameras, two per side, operate with intelligent software & capture seamless images of targets

Passenger Turnplate
Type of Product: Alignment   |  

Passenger Turnplate    
$940.00   BUY NOW

Our passenger turnplate are commercial quality low friction bearing plates supported by ground nylon ball bearings that allows the front and rear suspension of a vehicle to move freely for an inspection or wheel alignment.

The front turn plates are free floating multi directional that measures the angle of the turn with an optional pointer and gauge assembly.

Required for fast and accurate alignment measurements and adjustments of the front and rear suspensions for passenger car and truck, medium duty and heavy duty trucks.

Options Available

  • The turn plates are available in powder coated mild steel, stainless steel and aluminum.
  • Available as Mild Steel – Red (25-140) or Black (25-140-B)
  • Pointer available

Features

  • 4500 lbs per plate
  • “Dynamic Load Control”
  • 14″ x 14″ x 1.5″ tall
  • Black Available by special order/li>
RB-24 | Alignment Stands
Type of Product: Alignment   |  

RB-24 | Alignment Stands    
$3,630.00   BUY NOW

Continuing to meet the needs of our customers is a top priority at Quality Stainless Products. Because our customers often help us to identify a need in the market, we have developed the RB-24 Rolling Compensation Alignment Stands.

These “Roll Back” stands are used for Short Rolling Run Out Compensation for Vehicle Wheel Alignment.

Features

  • Removable “Bridge” included for roll back with locked turn plates.
  • Turn Plates built into the alignment stand.
  • Fold down wheel stops standard for clearance when using frame contact lifts.
  • Roll back distance is 15” with a 30” O.D. tire. Smaller tires have a greater Roll Back distance.
  • 2500 lb. capacity per Stand
  • Wheel Kit is included
DB-6000 | Bolt on Alignment Kit
Type of Product: Alignment   |  

DB-6000 | Bolt on Alignment Kit    
$2,645.00   BUY NOW

The DB-6000 Bolt on Alignment Kit lets you convert a general service rack into an alignment rack. It lets you position the turn plates in the location best suited to individual vehicle positioning and features simple installation on most general service lifts.

Features

  • R59 1/2″ x 20″ Full Floating Rear Slip Plates
  • Turn Plates Not Included but are available in black powder coated mild steel or stainless steel
  • Custom Sizes Available
  • Plastic base prevents rusting
  • Available in five different rear ramp configurations
Rotary Lift - ARO14
Type of Product: Lifts   |  

ARO14    
$28,820.00   BUY NOW

Versatility: it’s the standard to which Rotary Lift’s four-post lifts are built. These lifts handle cars, vans, trucks – even light and medium duty commercial vehicles.

  • Open-End Design
  • Dual Function Sentinel Lock™ System
  • Air Filter/Regulator/Lubricator
  • Single Piece Non-Welded Runway With Tracks For Rolling Jacks
  • Internal Airline
  • (2) 7,000 lbs. Capacity Rolling Jacks
  • Stainless Steel Radius Gauges
  • Rear Slip Plates
  • Compatible With The New Technology Alignment Systems On The Market Today
  • ALI Gold Certified (ARO14-X)

Rotary Lift - SPO10
Type of Product: Lifts   |  

SPO10    
$6,357.00   BUY NOW

Trust The Industry Standard Symmetrical 10,000 lb. Two Post

  • True Symmetrical column design
  • Customizable with your choice of arms and adapters
  • Extended height models available for added versatility
  • ALI Gold Certified (SPO10X)

Rotary Lift - SPO10
Type of Product: Lifts   |  

SPO12    
$6,285.00   BUY NOW

The Rotary SPO12 sets the standard for reliability and quality in 12,000 lb. lifts.

  • Standard front & rear three-stage arms
  • Truck adapters with stackable inserts for added reach
  • Available in alternate height configurations
  • ALI Gold Certified (SPO12X)

Rotary Lift - SPOA10TRIO
Type of Product: Lifts   |  

SPOA10TRIO    
$7,189.00   BUY NOW

The world’s best selling asymmetrical lift is updated to service a broader range of vehicles - with one innovative arm design!

  • Patented two-piece, three-stage arm
  • Vehicle Spotting Speed & Ease
  • Performance tested to 20,000 lift cycles
  • True asymmetrical rotated column design
  • ALI Gold Certified (SPOA10TrioX)

TLS - SCISSOR LIFT TLSS14ALORx1 / TLSS14FDORx1
Type of Product: Lift   |  

Scissor Lift     BUY NOW

ALIGNMENT OR SERVICE 14,000 LB. / 6.4T CAPACITY

DOUBLE WALL RUNWAYS WITH “Z” RAILS, BUILT IN RADIUS PLATE POCKETS & REAR SLIP PLATE

Features:

  • Built to higher quality standard; 100% North American made - premium US Leeson 3HP / 2.2kw motor and HPI pump.
  • Superior structural strength provides longer life and more precise alignments - Non flex double wall runways with built in “Z” rail and heavy duty 3” x 6.5” x 3/8” / 76mm x 165mm x 9.5mm wall tubular legs.
  • Greater flexibility with more models to chose from 100% North American made - premium US Leeson- Available in surface or flush mounted, alignment or service deck and a choice of floor mounted “console”control or space saving wall/floor mounted power unit with pendant control. 3HP / 2.2kw motor and HPI pump.
  • Premium options and accessories can expand the capabilities and service life Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium heavy duty extended life 5 year warranty HD jacking beams
  • Lower maintenance costs - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied. Zirk style grease fittings at all hinge points. Runway under rear slip plates is open to prevent water and dirt collecting
  • Precision leveling feature provides more accurate alignments - PCB Control with linear transducers control level to within 5/32” / 4mm. The full adjustable floor mounted rack and pinion style “gear blocks” allow for precise levelling.
  • Low pressure hydraulics provides longer life - 2” x 6” / 51mm x 152mm “Break Out” cylinders allow the 25” x 4-1/2” / 635mm x 114mm ID cylinders to operate at < 2500 psi under full load.
  • Designed for greater technician productivity - there are no obstructions between the runways or base frame. The lift rises 74” / 1880mm in 58 seconds with 20 locking positions. Built in runway compressed air outlets front and rear.
TLS - SCISSOR LIFT TLSS16ALORx1 / TLSS16FDORx1
Type of Product: Lift   |  

Scissor Lift     BUY NOW

ALIGNMENT OR SERVICE 16,000 LB. / 7.3T CAPACITY

DOUBLE WALL RUNWAYS WITH “Z” RAILS, BUILT IN RADIUS PLATE POCKETS & REAR SLIP PLATE

Features:

  • Built to higher quality standard; 100% North American made - premium US Leeson 3HP / 2.2kw motor and HPI pump.
  • Superior structural strength provides longer life and more precise alignments - Non flex double wall runways with built in “Z” rail and heavy duty 3” x 6.5” x 3/8” / 76mm x 165mm x 9.5mm wall tubular legs.
  • Greater flexibility with more models to chose from 100% North American made - premium US Leeson- Available in surface or flush mounted, alignment or service deck and a choice of floor mounted “console”control or space saving wall/floor mounted power unit with pendant control. 3HP / 2.2kw motor and HPI pump.
  • Premium options and accessories can expand the capabilities and service life Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium heavy duty extended life 5 year warranty HD jacking beams
  • Lower maintenance costs - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied. Zirk style grease fittings at all hinge points. Runway under rear slip plates is open to prevent water and dirt collecting
  • Precision leveling feature provides more accurate alignments - PCB Control with linear transducers control level to within 5/32” / 4mm. The full adjustable floor mounted rack and pinion style “gear blocks” allow for precise levelling.
  • Low pressure hydraulics provides longer life - 2” x 6” / 51mm x 152mm “Break Out” cylinders allow the 25” x 4-1/2” / 635mm x 114mm ID cylinders to operate at < 2500 psi under full load.
  • Designed for greater technician productivity - there are no obstructions between the runways or base frame. The lift rises 74” / 1880mm in 58 seconds with 20 locking positions. Built in runway compressed air outlets front and rear.
Pinnacle - Model T75 | Imaging Wheel Aligner
Type of Product: Alignment   |  

Model T75 Imaging Wheel Aligner     BUY NOW
$16,995.00

FREE SHIPPING

Features

  • The Model T75 comes with a four-camera system for faster more accurate measurements.
  • Our two-monitor system included with our T75 allows for rear adjustment with a remote.
  • The included tablet acts as a remote for controlling the program from anywhere in the shop.
  • Our Golden Eye Camera eliminates drive on assistance.
  • The advanced wide-angle camera provides maximum work height flexibility.
  • Our Patented targets precise and repeatable measurements.
  • Dynamic software allows for continuous movement during caster measurement and compensation.
  • Full alignment readings in less than two minutes with our ultra-fast software.
  • Available in multiple languages.
  • Free updates for three years.
  • Complete installation in less than two hours.
  • Remote tech support reduces services calls, saves time, and money.
  • “Black box” aircraft technology in the event of failure.
Pinnacle - Model T75A | Imaging Wheel Aligner
Type of Product: Alignment   |  

Model T75A Imaging Wheel Aligner     BUY NOW
$17,995.00

FREE SHIPPING

Features

  • The Model T75A comes with a four-camera system for faster more accurate measurements.
  • Moveable camera bar allows to do readings at any height.
  • Our two-monitor system included with our T75 allows for rear adjustment with a remote.
  • The included tablet acts as a remote for controlling the program from anywhere in the shop.
  • Our Golden Eye Camera eliminates drive on assistance.
  • The advanced wide-angle camera provides maximum work height flexibility.
  • Our Patented targets provide precise and repeatable measurements.
  • Dynamic software allows for continuous movement during caster measurement and compensation.
  • Full alignment readings in less than two minutes with our ultra-fast software.
  • Available in multiple languages.
  • Free updates for three years.
  • Complete installation in less than two hours.
  • “Black box” aircraft technology in the event of failure.
  • Remote tech support reduces services calls, saves time, and money.
Pinnacle - Model T75B | Imaging Wheel Aligner
Type of Product: Alignment   |  

Model T75B Imaging Wheel Aligner     BUY NOW
$18,495.00

FREE SHIPPING

Features

  • The T75B’s portability gives you the flexibility to work in multiple bays throughout the shop.
  • The Model T75B comes with a four-camera system for faster more accurate measurements.
  • Moveable camera bar allows to do readings at any height.
  • The included tablet acts as a remote for controlling the program from anywhere in the shop.
  • Our Golden Eye Camera eliminates drive on assistance.
  • The advanced wide-angle camera provides maximum work height flexibility.
  • Our Patented targets provide precise and repeatable measurements.
  • Dynamic software allows for continuous movement during caster measurement and compensation.
  • Full alignment readings in less than two minutes with our ultra-fast software.
  • Available in multiple languages.
  • Free updates for three years.
  • Complete installation in less than two hours.
  • “Black box” aircraft technology in the event of failure.
  • Remote tech support reduces services calls, saves time, and money.


GET MORE INFORMATION

Cutting Edge Automotive Solutions 

21106 US Hwy 98
Foley, AL 36535

location icon Sales: (877) 486-0634
Support: (855) 839-2626
Fax: (251) 217-9077
This email address is being protected from spambots. You need JavaScript enabled to view it.

TRANSLATE LANGUAGE

Information

Pinnacle Brochure

HOURS

Weekdays:   7:00 AM - 7:00 PM CST

Videos

Find a Distributor

Become a Distributor