Financing Available
Apply Here

TLS - 4 POST TLS415ALOXR1 / TLS415FDOXR1
Type of Product: Lift   |  

4 Post Open Front     BUY NOW

ALIGNMENT OR SERVICE 15,000 LB. / 6.8T CAPACITY

DOUBLE WALL RUNWAYS WITH “Z” RAILS, BUILT IN RADIUS PLATE POCKETS & REAR SLIP PLATE

Features:

  • Built to higher quality standard; 100% North American made - premium US Bucher 2HP / 1.5kw power unit.
  • Corrosion resistant protection - steel components are wheela-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.
  • Superior structural strength provides longer life and more precise alignments - Non flex double wall 23” / 584mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.
  • Greater flexibility with more models to chose from - Available in two runway lengths with built in wheel alignment or service deck. Lift can be ordered in red or blue.
  • Premium options and accessories can expand the capabilities and service life - Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium long life 5 year warranty HD jacking beams
  • Lower maintenance costs - Zirk style grease fittings at all 1-1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting. Thirty 7/8” / 22mm enclosed plated steel slip plate balls provide better support with minimal maintenance.
  • Extended Life “Non Twist” Cable design - Machined steel nickel plated 9” / 229mm pulleys with bronze self lubricating bushings. Non spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear.
  • Low pressure hydraulics provides longer life - 4”ID x 65” / 102mm ID x 1651mm cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.
  • Designed for optimum productivity - OPEN FRONT design provides clear access .Single point control with stainless steel cylinder air releases engage 12 locking positions. Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column.


TECHNICAL SPECIFICATIONS

Capacity 15,000 lbs / 6.8T
Overall Length Extended Model 285-1/8" / 7242 mm
Overall Length Standard Model 257-7/8" / 6550 mm
Deck Length Extended Model 237” / 6020mm
Deck Length Standard Model 210” / 5334mm
Overall Width 143” / 3632mm
Deck Width 23” / 584mm
Lowered Height 7-3/4” / 197mm
Raised Height 74” / 1880mm

Min. 4 Wheel Align. WB 88-1/2” / 2248mm
Max.4 Wheel Align. WB 164-1/2” / 4178mm
Max. 2 Wheel Align. WB 220-1/2” or 193-1/2” / 5601mm or 4915mm
Max. Service WB 232” or 205” / 5892mm or 5207mm
Lift Time 70 seconds
Power Requirement 230V - 60Hz - 1 Ph - 20amp
Shipping Weight 5,000 lb. / 2.3T
Part Number TLS415ALOXR1/ TLS415FDOXR1


Product Brochure - PDF

Product Dimensions - PDF

Tags: Lifts


GET MORE INFORMATION

Cutting Edge Automotive Solutions 

21106 US Hwy 98
Foley, AL 36535

location small Sales: (877) 486-0634
Support: (855) 839-2626
Fax: (251) 217-9077
This email address is being protected from spambots. You need JavaScript enabled to view it.

TRANSLATE LANGUAGE

Resources (PDF)

Pinnacle Brochure

HOURS

Weekdays:   7:00 AM - 7:00 PM CST

Videos

Website Design, Hosting, & Proprietary CMR EasyNews by Complete Marketing Resources, Inc.

ADD ARTICLE  |   LOGIN  |   WEBSITE ISSUE? SUBMIT TICKET